DeLonghi HFX85W15C, Manual

7

symbol   (F1); the temperature

can be set by pressing 

the temperature buttons (

or

  )  

(G) on the remote 

control. 

At first pressing, the display will show the current set-
point for approximately 4-5 seconds together along 
with the symbol; the temperature can be increased 
or decreased by pressing  button 

or   respectively.

-  The minimum setting is 50°F (10°C) and the maximum 

is  82°F (28°C).

-  In this mode it is possible to increase or decrease the 

fan speed by pressing the speed button 

or   (L) on 

remote control; the minimum fan speed available in 
heating mode is 1, the maximum is 6.

-  At first pressing, the display will show the current fan 

speed for approximately 4-5 seconds along with the

symbol.

 Please note:

 the appliance will operate for few 

seconds with a reduced airflow to allow the preheating in 
order to guarantee the best comfort.

 Please note:

 When the set temperature is reached, 

the appliance will automatically stop heating but could 
keep working for a preset time at reduced airflow speed. The 
appliance will restart heating again, at the previous settings, 
as long as needed to maintain the desired set temperature. 

Examples: heating mode

 -  Press heating button (F), the display shows  .

 -  Press the temperature button 

or

 (G) to select 

desired temperature.

-  Press the speed button 

or   (L) to increase or 

decrease the fan speed.

ECO

function 

This function can be activated only with the heating operating 
mode. To activate this function, press the ECO button (H) on 
the remote control, the display shows 

. The appliance 

will automatically set the power level to guarantee the best 
comfort while reducing the energy consumption. 

Fan mode

In this operating mode only the fan operates so the appliance 
does not heat the room.

This is ideal during summer days  

because it moves air in a room, creating a pleasant breeze 
instead of stale air.
-  To select this operating mode, press the fan button   

(M)

on the remote control,

the display shows the symbol 

  (M1). 

-  In fan mode 10 speeds are available. It's possible to 

increase or decrease the fan speed by pressing the 
speed button 

or   (L) on the remote control. The 

value changes one fan speed at a time.

-  At first pressing, the display will show the current fan 

speed.

Examples: fan mode

 -  Press fan button   (M)

, the display shows the symbol 

.