8
9
- Press the speed button
or (L) to increase or
decrease the fan speed. The display will show the fan
speed you have selected.
TIMER operation
The timer can be used to delay appliance start up or
shutdown. This avoids wasting electricity by not operating
the appliance when it is not needed.
This function can be activated from any operating mode.
-
DELAYED SWITCH-ON:
with the appliance in the
STANDBY mode position, press the timer button (K)
on the remote control,
the display shows the symbol
(K1) together with "h" (N). The time can be set pressing
the timer button repeatedly to select from the following
choices: 0.5h, 1h, 2h, 4h, 6h, 8h and 12h.
Once having set the desired time, it will remain in the
display for 4-5 seconds and then disappear.
When the programmed time has been reached, the
appliance automatically turns on with the same settings
it had during the previous operation.
Once the function has been set, if you want to go back to
operation without the timer, press the timer button (K)
twice rapidly. The timer symbol
disappears from the
display.
-
DELAYED SHUT-OFF:
With the appliance ON, press the
timer button (K) on the remote control. The display
shows the symbol (K1) together with "h" (N). The
time can be set pressing the timer button repeatedly
to select from the following choices: 0.5h, 1h, 2h, 4h,
6h, 8h and 12h. Once having set the desired time, it
will automatically disappear after 4-5 seconds. When
the programmed time has been reached, the appliance
shuts off automatically.
Once the function has been set, if you want to go back to
operation without the timer, press the timer button (K)
twice rapidly. The timer symbol
disappears from the
display.
Please note:
while the timer is active, the operating
settings of the unit can still be modified.
Please note:
while this funtion is active, if the timer
button is pressed one time, the remaining time will be shown
on the display.
Please note:
if a power failure or power interruption
occurs, the time function is reset and the appliance
automatically goes to STANDBY.
Please note:
if the ON/STANDBY button is pressed
while the timer function is active, the unit changes its status
(for example it goes to ON from STANDBY or vice versa) and
timer function will be deactivated.
Examples: timer function
- In heating mode press timer button till 6h appears
on display, press again to the desired value of 8h. The
selected time will disappear after 4-5 seconds if timer
button is not pushed again.
Oscillation button
If you want the appliance to distribute the airflow over a
larger area, press the oscillation button (J) on remote control.
The appliance will then oscillate right and left.
To stop the oscillation in the desired position, just press
oscillation button (J) again.
Please note:
never try to rotate the appliance
manually as you may damage the unit.
