background image

16

Components description

1. Trigger spray
2. Solution dispenser coupling
3. Motor unit
4. Solution system coupling
5. Water or water + shampoo selector
6. External tank
7. Fastening catches
8. Water level gauge
9. Wet/dry tank
10. Handgrip
11. Suction power selector
12. Motor unit handle
13. Electronic suction power selector

(electronic version only)

14. Solution dispenser coupling
15. Motor protection cage
16. Solution dispenser
17. Flexible hose coupling
18. Suction on indicator light
19. Suction ON/OFF button
20. Cleaning-lock button
21. Cold-water-cleaning button
22. Hot-water-cleaning button
23. Steam-cleaning button
24. Cleaning-on indicator light

Tools and accessories

25. Flexible suction hose with handgrip
26. Large triangular clear plastic attachment
27. Small triangular clear plastic attachment 
28. Carpet/rug brush
29. Window cleaning attachment

(where provided)

30. Hard floor brush
31. Extension tube handgrip
32. Multi-purpose nozzle
33. Round brush attachment
34. Crevice tool
35. Wet vacuum filter
36. Paper filter
37. Dust bag
38. Shampoo bottle
39. Two extension tubes
40. Dust bag ring
41. Steam brush attachment

ENGLISH

16/28 GB  3-01-2003  10:36  Pagina 16

Summary of Contents for PENTAVAP














Reviews: