52
for each symbol you want to delete. Only symbols
used in the current fi le are listed.
3. Select
Delete
. When you see the confi rmation
message, select
Yes
.
The waypoints with that symbol in the current fi le
are deleted from the fi le.
Averaging a Waypoint
When you average a waypoint, the PN-60 records a
series of GPS readings for the waypoint’s location and
averages them to increase the positional accuracy of the
waypoint. As you average the waypoint, the GPS status,
coordinates, elevation, number of readings at the location,
and estimated accuracy display. Multiple readings improve
the positional accuracy of the waypoint. The estimated
accuracy number decreases as the accuracy improves.
To average a waypoint
From the waypoint details page, go to
MENU > Average
Waypoint
. When the device has recorded the number
of readings you want, press
ENTER
.
Tip
Average your location during multiple visits, at different
times of the day to get the best results. Always place the
device in the same location to average the waypoint.
Projecting a Waypoint
You can project a waypoint at a new location by providing
the bearing and distance from an existing waypoint.
To project a waypoint
1. From the waypoint details page, go to
MENU >
Project Waypoint
.
2. Enter the information for projected waypoint in the
Bearing
and
Distance
fi elds.
3. Select
Move
to move the existing waypoint or
Create New
to mark a new waypoint at the projected
location. Then, press
ENTER
.
Visit the DeLorme Wiki at wiki.delorme.com for more
information. The latest version of the User Manual is always
available for download.
The Waypoints Page
Summary of Contents for Earthmate GPS PN-60
Page 1: ...Earthmate PN 60 GPS DELORME User Manual ...
Page 5: ......
