background image

                                                                                                                                                   

 

-  - 

2

2.3 Physical 

Characteristics 

      Length                     94.8  mm 

Width                      62.5  mm 

Height                                            41      mm 

Weight                     2.6 oz. / 75g  

Power connector 

      3.5mm 

 

2.4 Certification 

 

          Bluetooth 

 

 

 

 

        BQB 

Europe   

 

 

 

 

        CE, CE! 

       American 

 

 

 

 

    FCC Class B, ICES-003 Class B, FCC ID 

                                                                                                                             

3 Accessories 

3.1

 Power

 

 

Adapter 

 

Adapter is for charging. Supports 110V-220V. Multiple   

 

 

 

 

 

 

3.2

 Cables

 (Optional) 

    USB cable          This cable switches C25 connector to USB connector. The GPS data can be 

transmitted by USB port.   

        RS232 DB9 cable        This cable switches C25 connector to RS232 DB9 connector. The GPS data 

can be transmitted by UART port. 

        Cables for PDA            These cables can support some PDAs to receive GPS data.   
 

Summary of Contents for Earthmate PowerPack









Reviews: