2
Check the contents of your box.
Please note: Charge your inReach Explorer fully before using.
Connect the device to the AC adaptor and plug it into an electrical
outlet or use the USB cable to charge from your computer.
Antenna
– When using inReach Explorer, point the antenna up toward the sky,
and position the face of the device away from your body when attached to a
pack or a vest.
Display Screen
– The screen turns off automatically after 30 seconds without
activity to preserve power and prevent accidental button presses. To unlock
the screen, press the Power/Enter button, and then press the Left Arrow and
Enter to select Unlock. This sequence must be done within 5 seconds or the
screen will remain locked. You can change the timing of the auto-lock feature by
selecting Settings, then Display, and modifying the Display Timer.
Status Light
– The Status Light flashes green when there is a new message
waiting. The Status Light flashes red when there is something important for you
to see, like low power or a sending message delay. The light is NOT an indicator
of satellite connection.
Micro-USB Port
– Lift the protective cover to access the micro-USB port. Plug
in your USB cable for charging and for updates (when notified). While the cover
is not part of the internal waterproofing, it does protect against corrosion from
salt water.
SOS Button Lock
inReach Explorer Overview
Status Light
Antenna
SOS
Directional Pad
Power/Enter
Quit/
Preset Messages
Shortcut
Micro-USB Port
• inReach Explorer device
• Lanyard
• USB cable
• AC adaptor
• Pack clip
• Quick Start Guide
Your inReach Explorer box includes:
