4
Tracking
The
Tracking
button allows you to send your location at
10 minute intervals to explore.delorme.com when you
are using the inReach in standalone mode.
Press and hold the
Tracking
button for three seconds to
start or stop tracking. The
Tracking
LED will flash green
once every three seconds until you cancel tracking or
turn off the inReach.
Message
The
Message
button lets you send predefined mes-
sages that you created on explore.delorme.com when
you are using the inReach in standalone mode.
•
To send predefined message one, press and hold the
Message
button until the LED flashes once and then
release the button. The
Message
LED will flash once
every three seconds until the message is sent.
•
To send predefined message two, press and hold the
Message
button until the
Message
LED flashes twice
and then release the button. The
Message
LED will flash
twice every three seconds until the message is sent.
•
To send predefined message three, press and hold the
Message
button until the
Message
LED flashes three
Using the inReach as a
Standalone Device
You can use the inReach as a standalone device when
you don’t want to use it with an Android phone.
Power
•
Press and hold the
Power
button for three seconds to
turn the inReach on or off.
»
When powering on, release the
Power
button
when the
Power
LED is solid green. If the
Power
LED starts flashing you are in pairing
mode.
»
When powering off, release the
Power
button
when the
Power
LED flashes green rapidly.
•
When power is low, the
Power
LED flashes red once
every three seconds.
•
When there is not enough power to send any
messages or tracking points, the
Power
LED flashes
red every 1.5 seconds.
