manualshive.com logo in svg

DeLorme XMap 6, User Manual

The DeLorme XMap 6 is a versatile and powerful mapping software that allows users to navigate and explore with ease. Enhance your experience by accessing the comprehensive user manual in a hassle-free manner - simply visit 88.208.23.73:8080 to download it for free and unlock the full potential of your device.

Share
Download
background image

XMap User Guide 

316 

2.

 

Select an Address Book entry, and then click OK. 

•

 

To use your current GPS position as your stop or via location 
Select Stop at GPS Location from the Stop drop-down list.  
OR 

Select Via at GPS Location from the Via drop-down list. 

•

 

Type the stop or via location in the Stop or Via text box 
Type the name of an address book contact, user-added waypoint, or 
address.  

If you type an address, it must be in one of the following formats: 
street address, city, state OR street address, ZIP/Postal Code. 
The Book check box (underneath the Address Book buttons in the Find 

tab) must be selected to search for address book contact names.  

•

 

Right-click the map where you want to insert the stop or via 

1.

 

Right-click the map where you want to insert the stop or via. 

2.

 

Point to CreateRoute, and then click Insert Stop or Insert 

Via. 

•

 

Use the toolbar to insert a stop or via. 

3.

 

If the Auto check box is not selected, click Calculate to recalculate your route 
to include the stop or via. 
OR 

Click the Calculate button 

  on the toolbar. 

OR 
If the Auto check box is not selected, right-click the route, point to Manage 

Route, and click Calculate Road Quickest, Calculate Road Shortest, 
Calculate Trail, or Calculate Direct. 

Note  If the program is unable to find an exact match for the item that you 
typed, a dialog box opens with a list of the closest matches. Scroll through 

the list of search results until you find the one you want to locate, click the 
item to select it, and then click OK.  

4.

 

Click Directions to view the route directions. 

AND/OR 
Click Advanced to display the advanced routing options. 

AND/OR 
Click Plan Trip to assign end of day or fuel breaks to your route. 

AND/OR 
Click Back on Track to add your current GPS position as a via to the current 

route. 

Changing the Routing Method 

You can change your routing calculation method at any time. You may need to do 

this to update your routing preferences.  
Note  Routable roads require a routable DeLorme dataset. Routable trails require a 

topographic DeLorme dataset. For information, visit www.delorme.com or call 
DeLorme Direct Sales at 800-561-5105.  

To Change the Route Calculation Method 

1.

 

From the Route tab, click the New/Edit subtab. 

Summary of Contents for XMap 6






















































































































































































































































































































































































































































Reviews:

No comments

Related manuals for XMap 6

TANDBERG Movi 3.0 User Manual preview
Movi 3.0
Brand: TANDBERG Pages: 10
Avaya C460 SMON Quick Start Manual preview
C460 SMON
Brand: Avaya Pages: 20
F-SECURE POLICY MANAGER 7.0 - Administrator'S Manual preview
POLICY MANAGER 7.0 -
Brand: F-SECURE Pages: 241
Aastra MX-ONE 4.2 User Manual preview
MX-ONE 4.2
Brand: Aastra Pages: 46
deXlan TV Expert User Manual preview
TV Expert
Brand: deXlan Pages: 17
Siemens OC130S Installation Instructions Manual preview
OC130S
Brand: Siemens Pages: 11
Siemens ID Mouse V 3.1 User Manual preview
ID Mouse V 3.1
Brand: Siemens Pages: 28
Siemens ROS User Manual preview
ROS
Brand: Siemens Pages: 32
Siemens OpenScape Xpressions PhoneMail User Manual preview
OpenScape Xpressions PhoneMail
Brand: Siemens Pages: 110
Red Hat APPLICATION STACK 2.0 RELEASE Release Note preview
APPLICATION STACK 2.0 RELEASE
Brand: Red Hat Pages: 26
Red Hat NETWORK SATELLITE SERVER 4.0 Installation Manual preview
NETWORK SATELLITE SERVER 4.0
Brand: Red Hat Pages: 80
Red Hat NETWORK - USER REFERENCE GUIDE 3.1 User Reference Manual preview
NETWORK - USER REFERENCE GUIDE 3.1
Brand: Red Hat Pages: 78
Red Hat NETWORK SATELLITE 5.1.0 - CHANNEL MANAGEMENT Reference Manual preview
NETWORK SATELLITE 5.1.0 - CHANNEL MANAGEMENT
Brand: Red Hat Pages: 300
Avaya PARTNER ACS R5.0 Getting Started Manual preview
PARTNER ACS R5.0
Brand: Avaya Pages: 32
VBrick Systems VB Directory System User Manual preview
VB Directory System
Brand: VBrick Systems Pages: 21
VBrick Systems StreamPlayer v4.4 User Manual preview
StreamPlayer v4.4
Brand: VBrick Systems Pages: 32
F-SECURE MOBILE ANTI-VIRUS FOR SERIES 60 User Manual preview
MOBILE ANTI-VIRUS FOR SERIES 60
Brand: F-SECURE Pages: 90
GRASS VALLEY KAYAK HD Installation Planning Manual preview
KAYAK HD
Brand: GRASS VALLEY Pages: 60

Brands by name

Popular brands

Load more brands