Delphi Display Systems, Inc. RDS-INSFTTCU
Page 17 of 82
Confidential Document:
Do not copy or distribute without written permission from Delphi Display Systems, Inc.
Copyright
2012. [Unpublished Work]. All rights reserved
The configuration dialog box allows you to set up the IP address, mask, gateway and port settings for
your unit. Once you click
OK
the unit will reset so the new settings will take affect.
4.1.3 Disconnect Timer
The disconnect Timer feature allows you to create a timeout in
hours or minutes with your session to the Fast Track timer
automatically.
4.2 Site
To edit, delete, or add to the Site Configuration, click
on
Site
from the Menu Bar
The Site Configuration dialog box lets you add, edit,
and remove Fast Track
®
Timer sites from the Site
Name list. Each site can be configured for the type of
connection and the type of reports to create from the
downloaded data. When a new site is added to the
Site Name list a new file folder is created using that
site name. (Example: The site Fast Track Burger will
create a file folder C:\
… \Fast Track Software
Suite\Fast Track Burger). All data that has been
downloaded from this site will be stored in this file
folder.
Everything except for the site name can be
edited.
When the
Connect Type
is selected for
Direct
, only the Baud
Rate can be edited. The Baud Rate is usually set for Default
and uses the assigned baud rate you selected when the
Direct Port Configuration was configured. Selecting a
different baud rate in this field will override the baud rate in
the Direct Port Configuration.
When the
Connect Type
is selected for
TCP/IP
, enter the IP
Address OR domain name of your Fast Track
®
Timer.
(
Note:
Check with your network administrator for the IP Address or
domain name of the Fast Track Timer. If using a domain
name you must have a DNS server.)
Site Data
- This field displays the data for a unit that you have already
downloaded from. This displays the units’ serial number, the version of the
firmware the RS port and ESC are enabled or disabled and the expiration
date of the ESC.
