10
ENGLISH
10
BASIC FUNCTIONS
■
SWITCHING ON AND OFF
1
Press »
I/O
« to switch the device
on.
2
Hold down »
I/O
« to switch the
device off.
Note
If the device is switched on while
the ignition is on, it then switches
off and then on again automatical-
ly with the ignition. This is
provided that the contact
A 7
is
connected to terminal 15 of the
vehicle (see page 20).
If the device is switched on
without the ignition using »
I/O
«,
it switches off automatically after
120 minutes to protect the battery
of the vehicle. The device can then
be switched on again with »
I/O
«.
Caution
When the radio is switched on, the
automatic antenna extends.
Therefore always switch off the
device before entering a car wash.
■
ADJUSTING THE VOLUME
1
Adjust the volume using the
»
V
OL
« control knob.
– Display: e.g. »
VOL 10
« (scale
»
00
« to »
63
«).
■
MUTING THE LOUD-
SPEAKERS
1
Press »
I/O
« briefly to mute the
connected loudspeakers.
– Display: »
«.
2
Press »
I/O
« briefly to switch
back to the original volume.
– Display: »
« disappears
from the display.
MUTE
MUTE
VOL 10
■
SWITCHING LOUDNESS ON
AND OFF
Loudness means that certain
frequency ranges are boosted at
low volumes.
1
Hold down »
SND LOUD
« to
switch on loudness.
– Display: »
«.
2
Hold down »
SND LOUD
« to
switch off loudness.
– Display: »
« disappears
from the display.
LOUD
LOUD
■
SOUND SETTINGS
For BASS, TREBLE, BALANCE. and
FADER:
1
Select a setting by pressing
»
SND LOUD
« once or several
times.
– BASS changes the bass
setting (scale »–
7
« to »
+7
).
– TREBLE changes the treble
setting (scale »
-7
« to »
+7
«).
– BALANCE enables you to
balance the volume between
the left and right loud-
speakers.
BAL 0
TRB 0
BAS 0
01_CL_210MP3_ENG 06.12.2006 13:39 Uhr Seite 10
