7
3. Turn off the radio and SKYFi2
Receiver. Disconnect all cables.
4. Find a place where you can mount
your SKYFi2 Vehicle Adaptor
where it is most convenient for
you to use. It should be mounted
to a hard, flat surface if possible or
to a horizontal in-dash air vent. Be
certain the air vent is rigid enough
to hold the weight of both the
SKYFi2 Receiver and the SKYFi2
Vehicle Adaptor Kit.
b.
Vent mount:
Assemble the
mount (if not assembled) by
inserting the two clips into the
main piece. Clip the assembly
onto the vent, and then posi-
tion the pivoting kickstand at
the bottom. The orientation of
the clips must match each
other and may need to be
rotated in one of two possible
orientations depending on the
design of the air vent being
used. Be careful when
installing and removing the
vent mount clips to prevent
damaging the vent fins.
5. The SKYFi2 Vehicle Adaptor Kit
has three mounting options: flat
mount, vent mount, or swivel
mount.
a.
Flat mount:
Use the included
Velcro pads or extra adhesive
pad, attaching them to the back
of the SKYFi2 vehicle cradle
and then to a flat surface in
your vehicle. Do not install the
mount on a leather surface.
