7
ASSEMBLY INSTRUCTIONS
4.
Remove the fan junction box cover . Using wire
nuts (not supplied), connect house wires to fan
wires as shown in the wiring diagram on page 4.
Reattach fan junction box cover .
5. Connect a 4 in. circular duct (not supplied)
and vent to the outside. Secure it with duct tape
(not supplied) or clamp (not supplied) to make the
connection secure and air tight.
6. Cut a 6 1/2 inches (165mm) dia. opening .
Joist
Joist
Circular duct
a
a
6 1/2 inches (165mm) Dia.
Ceiling
Ceiling hole
6
5
4
Joist
Joist
Fan Body
1
3
Install the suspension brackets to the joists
with long wood screws, and secure the suspension
brackets to the fan body by using the short
screws (provided).
❶
3.
Junction
Box cover
a
Wire nut
b