6
Model:
RAD80L
ASSEMBLY INSTRUCTIONS
1. Mounting the fan between the joists
a. Insert either the 12 in. suspension brackets
❻
or 14 in. suspension brackets
❺
to the duct side
and back of the fan body
❶
, depending on the
distance between the joists.
b. Insert the fan body
❶
between joists. Make sure
the fan body is level and perpendicular with the
joist, and flush with ceiling surface.
c. Allow for thickness of the ceiling board used in
your application. Fan body
❶
should be flush
with ceiling board.
d. Secure the suspension brackets to joists with the
wood screws
C
.
e. Secure the suspension brackets to fan body
❶
with the short machine screws
A
.
f. Remove tap before connecting the duct as
shown in Figure 1-2.
Hardware
A
Short Machine Screw (M4x12) Qty.4
C
Wood Screw(
∅
4x14) Qty.8
5
6
A
C
1
1-2
1-1
