2. Attach the Day Bed Rail (Part B) to the Crib Side,
with the hole in the top at the side where the Guard
Rail will be installed, using (4) M6x40mm Bolts (Part
C). Tighten with the M4 Allen Wrench supplied.
B
C
Step 2:
1. One end of the Day Bed Rail (Part B) has a hole
in top, the other end has no hole.
For Left Installation the hole must be on the left.
For right Installation the hole must be on the right.
Hole in to of Rail
Both Ends
WARNING
Mattress Support MUST be in the lowest position.
Day Bed Rail MUST be used.
4
For either Right or Left installation
use as Day Bed as shown
