5
Customer Service
Tel. (800) 377-3777
www.DeltaChildren.com
Bassinet Assembly
• Fill the other base slots onto the cross tubes. Push on the base near
each cross tube to be sure it is in place.
• Insert an M6 x 4cm screw through the hole in each base, the ends of the legs and into
the end of each cross tube.
Hint:
You may need to align the holes of all three parts to properly insert the screw.
• Tighten the screw with the Phillips screwdriver.
• Repeat this procedure to fasten the legs, bases and cross tubes on the
other side of the assembly.
• First, fit the ends of a leg into short fabric sleeves in the storage basket.
• Then, fit the ends of the leg into receptacle in each base.
• Repeat this procedure to assemble the other leg to the storage basket
and bases.
Cross Tubes
Base
Legs
Short Tunnels
Receptacles
Base
M6 x 4cm Screws
3
4
5
