background image

- 18 -

- 19 -

Technical Characteristics

7

Siren alarm control unit CS 2000 TYXAL+

- Power supplied by: two 3,6V / 26 Ah lithium batteries

- Class III insulation

- Stand-by consumption: 10 μA max. / Average consumption in transmis

-

sion mode: 25 mA max. / Average consumption in alarm mode: 1,4 A 

max.

- 10-year life under normal use.

 

Low battery voltage: < 2,7 V

868,7 -> 869,2 MHz and 868 -> 868,6 MHz

 transmission frequencies

- Wireless range from 100 to 300 metres outside, varies depending on the 

associated equipment (the range can vary depending on the installation 

conditions and the electromagnetic environment)

- Wireless alarm equipment

- Environmental class I

- 1.000.000 possible codes

- Maximum number of associated products: 16

- Number of events recorded: 1250

- Sound level at 1 m: 109 dBA +/-2

- Tamper alarm on opening and dislodging

- Indoor use only

- Degree of protection: IP40 - IK06

- Operating temperature: +5°C to +40°C

- Storage temperature: -10°C to +70°C

- Humidity range: 75%

- Dimensions: 176 x 268,5 x 59,5 mm

- Weight (with battery): 900 grams.

- Maximum radio power < 10 mW

- Receiver category II

Wireless touch screen keypad CLT 8000 

TYXAL+

- Power supplied by: three LS14500 - 3,6V / 7,8 Ah lithium batteries

- Class III insulation

- Stand-by consumption: <10 μA max.

- Average consumption in transmission mode: 120 mA max.

- 10-year life under normal use.

868,7 -> 869,2 MHz and 868 -> 868,6 MHz

 MHz transmission frequencies

- Wireless range from 100 to 300 metres outside, varies depending on the 

associated equipment (the range can vary depending on the installation 

conditions and the electromagnetic environment)

- Wireless alarm equipment

- Environmental class 2

- Tamper alarm on opening and dislodging

- Indoor use only

- Degree of protection: IP31 - IK06

- Operating temperature: -10°C to +55°C

- Storage temperature: -10°C to +70°C

- Humidity range: 75%

- Dimensions: 89 x 168 x 28 mm

- Weight (with battery): 270 grams.

- Maximum radio power < 10 mW

- Receiver category II

Wireless door/window magnetic contacts DO 

TYXAL+

- Power supplied by: one LS 14500 - 3,6V lithium batteries

- Class III insulation

- Stand-by consumption: 5 μA max.

- Average consumption in transmission mode: 26 mA max.

- 10-year life under normal use.

868,7 -> 869,2 MHz and 868 -> 868,6 MHz

 MHz transmission frequencies

- Wireless range from 100 to 300 metres outside, varies depending on the 

associated equipment (the range can vary depending on the installation 

conditions and the electromagnetic environment)

- Wireless alarm equipment

- Environmental class 2

- Tamper alarm on opening and dislodging

- Degree of protection: IP30 - IK04

- Operating temperature: -10°C to +55°C

- Storage temperature: -10°C to +70°C

- Humidity range: 75%

- Dimensions:

For fixed part 20,5 x 98,3 x 24,5 mm,

For moving part 12 x 98,3 x 24,5 mm

- Weight (with battery): 66 grams.

- Maximum radio power < 10 mW

- Receiver category II

Wireless dual lens motion detector DMB 

TYXAL+

- Power supplied by: one LS 17500 - 3,6V lithium batteries

- Class III insulation

- Stand-by consumption: 5 μA max.

- Average consumption in transmission mode: 26 mA max.

- 10-year life under normal use.

868,7 -> 869,2 MHz and 868 -> 868,6 MHz

 MHz transmission frequencies

- Wireless range from 100 to 300 metres outside, varies depending on the 

associated equipment (the range can vary depending on the installation 

conditions and the electromagnetic environment)

- Wireless alarm equipment

- Environmental class 2

- Tamper alarm on opening and dislodging

- Degree of protection: IP30 - IK04

- Operating temperature: -10°C to +55°C

- Storage temperature: -10°C to +70°C

- Humidity range: 75%

- Dimensions: 67,8 x 77,3 x 45,3 mm

- Weight (with battery): 90 grams.

- Maximum radio power < 10 mW

- Receiver category II

Wireless remote control for alarms and/or 

control systems TL 2000 TYXAL+

- Power supplied by: one CR2430 - 3V  lithium batteries

- Class III insulation

- Stand-by consumption: 0,6 μA max. / Average consumption in transmis

-

sion mode: 23 mA max.

- 10-year life under normal use.

868,7 -> 869,2 MHz and 868 -> 868,6 MHz

 MHz transmission frequencies

- Wireless range from 100 to 300 metres outside, varies depending on the 

associated equipment (the range can vary depending on the installation 

conditions and the electromagnetic environment)

- Wireless alarm equipment

- Environmental class 2

- Degree of protection: IP32

- Operating temperature: -10°C to +55°C

- Storage temperature: -10°C to +70°C

- Humidity range: 75%

- Dimensions: 42 x 65 x 8 mm

- Weight (with battery): 25 grams.

- Maximum radio power < 10 mW

- Receiver category II

TYDOM 1.0 (connected home hub) - Optional

- Adaptor power supply: Input 100-240V~, 50-60 Hz, 0,3 A;

Output 5V=, 1A

- Class II insulation

868,7 -> 869,2 MHz

 transmission frequency

- Wireless range from 100 to 300 metres outside, varies depending on the 

associated equipment (the range can vary depending on the installation 

conditions and the electromagnetic environment)

- Degree of protection: IP30 - IK04

- Operating temperature: -10°C to +40°C

- Storage temperature: -20°C to +70°C

- Dimensions: 100 x 100 x 30 mm

- Weight (with battery): 472 grams.

- Maximum radio power < 10 mW

- Receiver category II

Summary of Contents for Pack TYXAL+ Access












Reviews: