- 12 -
- 13 -
Name
Ok
A
Back
Create
Ok
Installer code
Restricted code
User code
Back
Create
Ok
Installer code
User code
Back
Restricted code
Create
Ok
Installer code
Restricted code
Back
User code
Restricted code
Ok
New
User code 2
User code 1
Back
Restricted code
New
User code 2
User code 1
Back
Access codes
Access level
Ok
Create
Back
Delete
Remove all codes
Confirm ?
Yes
No
Remove code
Confirm ?
Yes
No
Installer code
XXXXX
X
Name
Back
Restricted code
XXXXX
X
Name
Back
Name
Ok
A
Back
Delete
Ok
User code
Back
Restricted code
Remove code
Ok
User 1
Back
User 2
Assign zone
Zone 3
Ok
Zone 1
Zone 2
Sélect.
Assign zone
Zone 3
Ok
Zone 1
Zone 2
Sélect.
Settings
Programming
Ok
Back
Download
Access codes
Name
Ok
A
Back
User code
XXXXX
X
Name
Back
Access code
XXXXX
X
Ok
SOS
1
2
25/11/1
7
12:48
SOS
Settings
OFF
Enter your code
Info
Settings
My house
OFF
25/11/1
7
12:48
4
5
3
• from the installer code
❶
Enter the installer code (123456, by default) and confirm with OK.
❷
Press Settings, select the menu: Access code, then confirm with OK.
❸
To create a code, select
the menu: Create > ...,
then confirm with OK.
- Installer code: enter the installer
code and name it,
then confirm with OK.
- User code: enter the user
code and name it,
then confirm with OK.
- Restricted code: select an
existing user code or create a
new code (by naming it),
then assign it to one (or more)
zone or zones, then confirm with OK.
❹
To delete one code or all
codes (
❺
),select the menu
«Delete» or «Delete all»,
then confirm with Yes.
Creating your access codes
3
• General
Possible actions
Simple user code
Advanced user code
Language selection
X
X
Clock setting (date, time, etc.)
X
X
Download
X
X
Programming
X
Changing/naming a user access code
X
X
Activating/Deactivating a product
X
X
Naming a product
X
X
Changing sound levels
X
Setting the brightness of the CLT8000 screen
X
X
Setting the brightness of the CLT8000 buttons
X
X
Activating/deactivating the beeps of the CLT8000 buttons
X
X
Naming the zones
X
X
Programming the call numbers
X
Incoming calls (dual call/number of rings)
X
X
SMS alert to relatives
X
X
SIM card (PIN/PUK codes)
X
Activating/deactivating the auto attendant (transmitter)
X
X
The access codes (6 digits) are recorded in the alarm control unit. You configure the access codes once with the
CLT 8000 TYXAL+ touch screen keypad and the other products (keypads or transmitters) recognise these codes
automatically. You do not need to configure the codes on each product.
You have:
- 1 «installer» code (123456 on activation). It is strongly recommended that you create your own code.
- 10 «user» or «restricted» codes. You must create at least one.
• The installer code enables all the control and configuration actions for the system.
From the installer code, you can create or remove all codes (user and installer).
It can shut down the system only if the system was activated by an installer code.
• The user code enables the control actions and a few configuration actions. There are 2 access levels «Simple» and
«Advanced» (see table below).
• Restricted code: a user code can be of the restricted type, that is to say that it only gives access to the ON and OFF
commands of the zones with which it is associated (e.g. maintenance personnel, delivery, etc.).
• Zones must have previously been created to create restricted codes.
• With the «Delete all» menu, all the «user» codes are deleted and the «installer» code is set to its default value
(123456).
• To modify a «user» code from the installer code, you must first delete, then recreate it.
Wrong code entered: The keypad is locked for 90 seconds after five attempts to enter the wrong code.
If there are many attempts to enter a wrong code (21 maximum), an alarm cycle will be triggered.
