63
EN
62
Scénarios
Réglages
11.5°C
Lun. 23 Septembre
18:28
Autres
Conso
Thermique
Volets
Ouvrant
31
Calendrier
Eau chaude
8. Association of home automation functions
allows (X3D receivers).
You can check it with our customer services.
Associations can be of 2 types:
• direct association
• repeater: if the receiver or receivers are used as
relays to extend the signal to other
receivers normally out of wireless range (extended
installations, thick concrete walls, etc.).
X3D gate
receiver
X3D lighting
receivers
8.4 To associate X3D thermal receivers
• Set all the receivers to association wait mode (refer to the user guides).
• From the main menu, type
#400 then type 1
•
The transmitter displays: "Configuring..."
After a few seconds, the transmitter announces the number of receivers found on
the installation:
Example: "5 thermal points associated, 0 repeater associated".
Check that:
• the LED of the receivers has stopped flashing.
8.3 To associate CALYBOX 1020, CALYBOX 2020,
TYBOX 1010, TYBOX 2010, TYBOX 2020
• Set the product to association wait mode (refer to the user guide).
• From the main menu, type
#401 then type 1
•
The transmitter displays: "Configuring..."
After a few seconds, the transmitter announces the product found
on the installation:
Example: "1 thermal points associated".
8.5 To associate ROLLIA X3D roller shutter motors
or roller shutter receivers (unit 1).
• Set all motors and all receivers
to association wait mode. (see its guide)
• From the main menu, type
#410 then type 1
•
The transmitter displays: "Configuring..."
After a few seconds, the transmitter announces the number of roller shutters
found on the installation:
Example: "3 roller shutters associated, 2 repeater associated".
Check that:
• the association was successful: the motors briefly start twice
• the LED of the receivers has stopped flashing.
Repeat the same procedure to associate the roller shutters of unit 2, by typing #411
Summary of Contents for TTGSM TYXAL+
Page 230: ...230 ...
Page 231: ...231 ...
