67
EN
66
9.3 Close up the transmitter
Click
Click
1
1
2
2
3
1
2
Refit the upper cover
and clip it onto the unit.
Refit the bottom cover.
Lock the unit.
Press the button of the detector to test.
The transmitter vocally indicates the detector type associated and its status.
Example: "Smoke detector, nothing to report"
9.2 Association test
9. Operation in autonomous mode
Press the button of each detec-
tor to associate.
The green repeater LED will
come on briefly.
Close up the repeater and lock
the unit.
To exit the association mode
press the T2 button of the trans-
mitter (the exit is automatic after
5 minutes).
REP TYXAL+ that enables the repetition of informa-
tion sent by a product that the transmitter would not
capture (environment or distance).
The transmitter starts a call directly if any event is
detected. The remote monitoring and intercom func-
tions are compatible with this operating mode.
4
5
The transmitter vocally indicates the detector type associated and
its status.
Press the button of each detector to associate (16 max.).
To exit the association mode press the T2 button of the transmitter
(the exit is automatic after 5 minutes).
1
2
3
BIP
>5s
T2
T1
T2
Summary of Contents for TTGSM TYXAL+
Page 230: ...230 ...
Page 231: ...231 ...
