Chapter 2 Installation and Storage
ASDA-B2
2-2
Revision September 2013
2.3 Installation Conditions
Operating Temperature
ASDA-B2 Series Servo Drive
:
0°C to 55°C (32°F to 131°F)
ECMA Series Servo Motor :
0°C to 40°C (32°F to 104°F)
The ambient temperature of servo drive should be under 45°C (113°F) for long-term
reliability.
If the ambient temperature of servo drive is greater than 45°C (113°F), please install the
drive in a well-ventilated location and do not obstruct the airflow for the cooling fan.
Caution
The servo drive and motor will generate heat. If they are installed in a control panel, please
ensure sufficient space around the units for heat dissipation.
Pay particular attention to vibration of the units and check if the vibration has impacted the
electric devices in the control panel. Please observe the following precautions when
selecting a mounting location.
Failure to observe the following precautions may void
the warranty!
Do not mount the servo drive or motor adjacent to heat-radiating elements or in direct
sunlight.
Do not mount the servo drive or motor in a location subjected to corrosive gases,
liquids, airborne dust or metallic particles.
Do not mount the servo drive or motor in a location where temperatures and humidity
will exceed specification.
Do not mount the servo drive or motor in a location where vibration and shock will
exceed specification.
Do not mount the servo drive or motor in a location where it will be subjected to high
levels of electromagnetic radiation.
VARITEL INGENIERIA ELECTRONICA S.A.
info@varitel.com - www.varitel.com - Tel. (54) 11-4243-1171 / Fax: (54) 11-4292-7545
Manuel Baliña 456, Lomas de Zamora (B1832CCJ) Buenos Aires, Argentina.
