- 31 -
To exit the main menu or a submenu, select the item EXIT (last menu item).
Changing a parameter
After selecting the desired parameter, it can be changed, if allowed, in the following way:
1.
Use
/
keys to highlight
the current setting of the parameter.
TEMPERATURE
Choose the measuring unit
used on display
°C .
OK
..
CANCEL
select <ENTER>confirm
2.
Press
ENTER
, the field will start blinking.
3.
Use
/
keys to select the desired setting and confirm with
ENTER
. If you are setting a
numeric value, you can move faster by keeping
or
keys depressed.
4.
Press
to select the option OK and confirm with
ENTER
. The instrument closes the
parameter window and returns to the previous menu level.
To exit a parameter window without changes, select CANCEL and confirm with
ENTER
.
If only the option CANCEL is available in the parameter window, it means that it is not al-
lowed to change the parameter setting.
Menu structure
The complete structure of the main window with the relevant submenus is shown below. Ac-
cording to the data logger model, some items could not be available if not significant for that
particular model.
1) Information
It lists the general information of the instrument: model, serial number, RF address,
user code, firmware version, calibration date, etc.
2) Display configuration
1)
Measures ordering
: changes the order for the display of the measurement quan-
tities on the screen. To move a quantity, select it in the displayed list, press ENTER,
move the quantity to the desired position and confirm with ENTER.
2)
Reset measures order
: choice of the default or user-defined viewing sequence.
3)
Exit
: returns to main menu.
3) RF Parameters
1)
Network Address
: network address (not RF) of the data logger. It is used to ad-
dress the data logger in a Modbus network. Read-only parameter if the instrument
is connected to a base unit.
2)
RF Channel
: used channel of the RF transmission band. Read-only parameter if
the instrument is connected to a base unit.
3)
RF Frequency
: used RF transmission band. Only in the
…U
models, by entering the
menu with administrator password it is possible to choose the initial frequency of the
RF band among 902, 915 and 921 MHz (the final frequency is always 928 MHz).
4)
Max number RF Hops
: maximum number of RF hops from the data logger to the
base unit (equal to the number of interposed repeaters plus 1). Read-only parame-
ter if the instrument is connected to the base unit.
5)
RF offline
: enables or disables the RF stage of the data logger. Activation or deac-
tivation of the RF stage can be performed also through the connection button.
