- 32 -
6)
Exit
: returns to the main menu.
4) Ch x
settings
(x=1, 2, 3) –
Only available in the models with configurable inputs
1)
Ch x info
: lists all the general information of the input channel Ch x of the instru-
ment: name of measurement, probe type, resolution. The correspondence between
the input signal value and the physical quantity value is also indicated for mA, mV,
V, Potentiometer and Counter inputs associated with a physical quantity.
2)
Ch x configuration
: sets the type of input among the available inputs (see para-
graph 8.5.1 on page 37 for setting modes). The input type can be set only with the
administrator password.
3)
Ch x zero setting
: sets the current measurement value as zero value. Only avail-
able for mA, mV, V and Potentiometer inputs associated with a physical quantity.
4)
Ch x down threshold
: lower alarm threshold of channel x.
5)
Ch x up threshold
: higher alarm threshold of channel x.
6)
Ch x reset counter
: zeroes the number of counts. The item is available only if the
channel is configured as counter.
7)
Exit
: returns to the main menu.
5) Alarm thresholds
or
Alarm configuration
1)
Quantity 1 down threshold
: lower alarm threshold of quantity 1. The type of
quantity depends on the data logger model.
2)
Quantity 1 up threshold
: higher alarm threshold of quantity 1. The type of quan-
tity depends on the data logger model.
3)
…
4)
Quantity n down threshold
: lower alarm threshold of quantity n. The type of
quantity depends on the data logger model.
5)
Quantity n up threshold
: higher alarm threshold of quantity n. The type of quan-
tity depends on the data logger model.
6)
Thres. buzzer alarm
: activates or deactivates the buzzer when measurement
thresholds are exceeded.
7)
Exit
: returns to the main menu.
Note
: in the models with configurable inputs, the items down threshold and up threshold
of quantities are not available in this submenu, but are included in the menus for the set-
ting of channels Ch 1, Ch 2 and Ch 3.
6) Unit measures
1)
Quantity 1
: measurement unit of quantity 1. The type of quantity depends on the
data logger model.
2)
…
3)
Quantity n
: measurement unit of quantity n. The type of quantity depends on the
data logger model.
4)
Exit
: returns to the main menu.
Note
: in the HD35EDH model, only the temperature measurement unit is available. Meas-
urement units for the other quantities are configurable in the menus for the setting of
channels Ch 1, Ch 2 e Ch 3.
Note
: the unit of measurement is changed only on the LCD; the data are always sent in
the unit of measurement set in the base unit.
7) Logging
1)
Start/stop log
: enables or disables logging.
2)
Logging mode
: choice between cyclical management (the new data overwrite the
old ones when the memory is full) or non-cyclical management (logging stops when
the memory is full) of the data logger memory.
