- 6 -
3
INSTALLING THE SYSTEM
Before placing the devices in the final working environment, it is recommended to perform the
system function test on the bench. The bench test allows also the wireless network to be con-
figured more easily, in case the supplied system is not factory-configured.
To check and make the system operational, proceed as follows:
Fig. 3.1: system installation procedure
1.
Install HD35AP-S and MySQL softwares
2.
Connect the battery to the base unit
3.
Connect the base unit to the PC
4.
Connect the software to the base unit
8.
Add devices to the network
9.
Check RF communication quality
Network factory-configured
Network not configured
10.
Install the devices
7.
Activate the RF stage of the devices
11.
Check if the devices can be reached
All devices can be reached
Some devices cannot be reached
12.
Add repeaters to the network
Installation Completed
13.
Configure network parameters
5.
Check the clock setting
6.
Connect the battery of the other network devices
