ENGLISH
88
KEY
SIMBOLS LIT BESIDES
THE NUMBERS
FUNCTION
DESCRIPTION
P1+
= data dump
- P1 -
When ENTER is pressed with P1
on the display, the data stored in
the memory of the instrument are
unloaded (DUMP); press the
PROG key to move on to step P2.
During the data dump, the messa-
ge dUP appears on the upper
display of the instrument and the
number of the memory unit cur-
rently being dumped appears on
the lower display.
At the end the instrument automa-
tically returns to normal operating
mode.
The unloading of data from the
instrument memory may be
momentarily stopped by pressing
the ENTER key.
Press the ENTER key again to
reactivate data unloading.
When the PROG key is pressed,
data unloading is finally concluded.
At the end of each block the
report is sent with the maximum,
minimum and mean values calcu-
lated on the block.
During the DUMP phase the
instrument does not switch off
automatically, all the key functions
are disabled except the ENTER,
PROG and ON/OFF keys.
Note:
The block is defined at the
moment of storage as a group of
consecutive recordings. The first
