HD32.3
- 29 -
V1.4
1.
using
◄
►
arrow key select the data to modify (year/month/day and hour/minutes/seconds);
2.
once selected, the data will start flashing;
3.
change the value with
▼▲
keys;
4.
confirm pressing
ENTER
;
5.
to be back to
Logging
menu without modifying anything, press
ESC
;
6.
to be back to the main menu, press
ESC
again;
7.
to exit directly from the main menu, press
MENU
.
NOTE: by default the hour of set adquisition end hour is more than 10 minutes with
reference to the start hour of Logging Section.
Once set both the values, you can visualize the hours summary: date and hour of start and end of
LOG section.
WBGT Index
2008/11/10 08:00:00
<ENTER> confirm
Start time
2008/11/28 10:29:00
End time
2008/11/28 10:39:00
<ESC> exit/cancel
8.
Press
ENTER
to confirm or
ESC
to exit without activating the automatic start: in both cases,
you’ll go back to
LOGGING
menu.
9.
Press MENU to exit directly from the main menu.
When the instrument starts automatically the LOG section, a beep is given out for each adquisition
and, in the upper part of the display, the flashing writing
LOG
appears,
To block the section before the set stop time, press the key
MEM
.
To cancel the settings of automatic start, use the function
Cancel auto start
, described in the
following paragraph.
NOTE:
the automatic logging section starts also if the instrument is off
. If, when you start the
section of automatic logging, the instrument is off, it switches on some seconds before the start time
and, at the end of the logging, remains on. If it’s supplied by batteries, it switches off after some
minutes of inactivity at the end of logging section.
To set the auto- switching off, see the paragraph 5.2.2.
5.2.4 Cancel auto start
Once set the start and end times of LOG section, you can avoit the auto start of the section through
Cancel auto start
heading.
Once entered into
LOGGING
submenu:
1.
select, using
▲
▼
arrow keys,
Cancel auto start
heading
2.
a message containing the start and end time of LOG section will be visualized:
Summary of Contents for HD32.3
