- 27 -
WARNING!
When the instrument is locked by a password, all keys are locked, except
MEM
, used
to start the LOG session (data capture) and
SETUP, ENTER
and
ESC
that allow entering the main
menu to unlock the instrument.
Therefore the user has to
first
set all required parameters, protect the instrument using the
KEY LOCK function and start the LOG session, in order to prevent any undesired access by
unauthorized personnel.
To
unlock
the instrument, repeat the steps above: Enter the main menu and unlock the instrument
using the
Key lock
item and entering the password.
If the password is wrong, you will get the message “Wrong password”. The default password is
“0000” (four zeroes).
4.10
P
ASSWORD
This menu item allows to set a password to protect the instrument from unauthorized access. There
are two types of available passwords, both consisting of four characters:
•
The
user
password
: Can be set by the user to protect the instrument from unauthorized access;
•
The
factory password
: Reserved to Technical Support
To access the
Password
submenu, proceed as follows:
1.
Press
SETUP
;
2.
Use the arrows
▲▼◄►
to select
Password
;
3.
Press
ENTER
;
4.
You will get the following message
5.
Use the arrows
▲▼
to select
User
password
;
6.
You will get the message “Insert old password” The default password is “0000” (four zeroes).
7.
Use the
▼▲
arrows to enter the current password;
8.
Press
ENTER
to confirm (or
ESC
to cancel);
