2
TABLE OF CONTENTS
IMPORTANT SAFETY INSTRUCTIONS
Read and understand all warnings and operating instructions before using any tool
or equipment. When using tools or equipment, basic safety precautions should always be followed
to reduce the risk of personal injury. Improper operation, maintenance or modification of tools or
equipment could result in serious injury and property damage. There are certain applications for which
tools and equipment are designed. Delta Machinery strongly recommends that this product NOT be modified and/or
used for any application other than for which it was designed.
SAFETY GUIDELINES - DEFINITIONS
Some dust created by power sanding, sawing, grinding, drilling, and other construction activities
contains chemicals known to the State of California to cause cancer, birth defects or other reproductive harm.
Some examples of these chemicals are:
s
LEADFROMLEADBASEDPAINTS
s
CRYSTALLINESILICAFROMBRICKSANDCEMENTANDOTHERMASONRYPRODUCTSAND
s
ARSENICANDCHROMIUMFROMCHEMICALLYTREATEDLUMBER
Your risk from these exposures varies, depending on how often you do this type of work. To reduce your
exposure to these chemicals: work in a well ventilated area, and work with approved safety equipment, always
wear NIOSH/OSHA approved, properly fitting face mask or respirator when using such tools.
IMPORTANT SAFETY INSTRUCTIONS ....................2
SAFETY GUIDELINES - DEFINITIONS .....................2
GENERAL SAFETY RULES .......................................3
ADDITIONAL SPECIFIC SAFETY RULES ................4
FUNCTIONAL DESCRIPTION ..................................6
CARTON CONTENTS ...............................................6
ASSEMBLY .................................................................7
OPERATION ...............................................................10
If you have any questions relative to its application DO NOT use the product until you have written Delta Machinery and
we have advised you.
Contact us online at
www.deltaportercable.com
or by mail at
Technical Service Manager, Delta
Machinery, 4825 Highway 45 North, Jackson, TN 38305. In Canada,
125 Mural St. Suite 300, Richmond Hill, ON, L4B 1M4)
Information regarding the safe and proper operation of this tool is available from the following sources:
s 0OWER4OOL)NSTITUTE
1300 Sumner Avenue, Cleveland, OH 44115-2851or online at
www.powertoolinstitute.org
s .ATIONAL3AFETY#OUNCIL
1121 Spring Lake Drive, Itasca, IL 60143-3201
s !MERICAN.ATIONAL3TANDARDS)NSTITUTE
25 West 43rd Street, 4 floor, New York, NY 10036
www.ansi.org -
ANSI 01.1
Safety Requirements for Woodworking Machines
s 53$EPARTMENTOF,ABOR
regulations
www.osha.gov
SAVE THESE INSTRUCTIONS!
TROUBLESHOOTING ................................................11
MAINTENANCE..........................................................11
SERVICE .....................................................................11
ACCESSORIES...........................................................12
WARRANTY................................................................12
FRANÇAIS .................................................................13
ESPAÑOL....................................................................24
It is important for you to read and understand this manual. The information it contains relates to protecting YOUR SAFETY
and PREVENTING PROBLEMS. The symbols below are used to help you recognize this information.
Indicates an imminently hazardous situation which, if not avoided,
will
result in
death or serious
injury
.
Indicates a potentially hazardous situation which, if not avoided,
could
result in
death or serious
injury.
Indicates a potentially hazardous situation which, if not avoided,
may
result in
minor or moderate
injury.
Used without the safety alert symbol indicates a potentially hazardous situation which, if not avoided,
may
result in
property damage
.
