INSTALLATION INSTRUCTIONS FOR
HAND SHOWER GLIDE RAIL
72633
Model
55531
▲
Series
Your Glide Rail adjustable shower mount is designed for easy installation
using the special adhesive tape and screws supplied. However, before
you proceed, we recommend you carefully read these instructions to help
determine the best mounting method and assure a satisfactory installation.
1. SELECT LOCATION
Select wall position at convenient location
suitable for height of bathers. Hold the Glide
Rail against the wall to check height and
make sure it is located to permit full height
adjustment with the shower hose to be used.
2. DECIDE ON MOUNTING METHOD
On any smooth surface such as tile, fiberglass,
marble, etc., the special mounting tape
attached to the rail is usually satisfactory
by itself. For best adhesion of the mounting
tape, do not mount rail directly over a vertical
ceramic tile line. On any rough surface such as
uneven tile, etc., the screws provided should
be used in addition to the tape.
www.deltafaucet.com
3/9/12 Rev. B
1
▲
Designate proper finish suffix
