Chapter 7 Optional Accessories
|
C200 Series
7-13
Function Key
1.
It has the factory setting function and the function can be set by the user. The present
factory setting: F1 is JOG function.
2.
Other functions must be defined by TPEditor first. TPEditor software V1.30.6 is available
for download at:
http://www.delta.com.tw/ch/product/em/download/download_main.asp?act=3&pid=1&cid=1&tp
id=3
HAND ON Key
1.
This key is executed by the parameter settings of the source of Hand frequency and hand
operation. The factory settings of both source of Hand frequency and hand operation are
the digital keypad.
2.
Press HAND ON key at stop status, the setting will switch to hand frequency source and
hand operation source. Press HAND ON key at operation status, it stops the AC motor
drive first (display AHSP warning), and switch to hand frequency source and hand
operation source.
3.
Successful mode switching for KPC-CE01, “H/A” LED will be on; for KPC-CC01, it will
display HAND mode/ AUTO mode on the screen.
1.
This key is executed by the parameter settings of the source of AUTO frequency and
AUTO operation. The factory setting is the external terminal (source of operation is
4-20mA).
2.
Press Auto key at stop status, the setting will switch to hand frequency source and hand
operation source. Press Auto key at operation status, it stops the AC motor drive first
(display AHSP warning), and switch to hand frequency source and hand operation source.
3.
Successful mode switching for KPC-CE01, “H/A” LED will be off; for KPC-CC01, it will
display HAND mode/ AUTO mode on the screen
Descriptions of LED Functions
LED Descriptions
Steady ON: operation indicator of the AC motor drive, including DC brake, zero speed,
standby, restart after fault and speed search.
Blinking: drive is decelerating to stop or in the status of base block.
Steady OFF: drive doesn’t execute the operation command
Steady ON: stop indicator of the AC motor drive.
Blinking: drive is in the standby status.
Steady OFF: drive doesn’t execute “STOP” command.
Operation Direction LED
1. Green light is on, the drive is running forward.
2. Red light is on, the drive is running backward.
3. Twinkling light: the drive is changing direction.
(Only KPC-CE01 support this function)
Setting can be done during operation.
HAND LED: When HAND LED is on (HAND mode); when HAND LED is off (AUTO mode).
(Only KPC-CE01Support this function )
Setting can be done during operation.
AUTO LED: when AUTO LED is on (AUTO mode); when AUTO LED is off (HAND mode).
Dimension
Call 1(800)985-6929 for Sales
deltaacdrives.com
sales@deltaacdrives.com
Call 1(800)985-6929 for Sales
deltaacdrives.com
sales@deltaacdrives.com
