Download & Connect to Data Collector & Initial Setting & Register
Method for communication card
(1) Remove the communications connectors from the inverter, and thread the cables through the waterproof gasket.
(2) Hold down the top of the terminal block on the communications connectors, and insert the cables connected to
the Data Collector as follows: 1 VCC, 2 GND, 3 DATA+, 4 Data-.
(3) Next, insert the cables into the adjacent inverter as follows: 5 Data+, 6 Data-.
Check that the cables have been inserted securely.
(4) Next, insert the aforementioned cables into the adjacent inverter as follows: 3 Data+, 4 Data-.
(5) After completing the connection, turn ON the terminal switch for only the inverter that is farthest from the Data
Collector, and set all the other inverter to 1 (OFF).
ON
ON
ON
RS485-B
RS485-A
ＧＮＤ
＋１２
V
Communications
connecto
r
Communications
connecto
r
Communications
connecto
r
I
nverter
2
I
nverter
X
I
nverter 1
Terminal switch
inverter with
farthest connection
from the Data Collector
ON
1
Factory
default
Communications
connector
Communications
cables
Terminal
switch
ON
1
To the Data Collector
16-pin connecto
r
20190614
Wi-Fi / RS-485 Mode
Home Screen
16-pin connecto
r
RS485-A
ＧＮＤ
+12V/24V
RS485-B
3.
Initial setting on APP ( *
Data Collector connected )
①
Sign In. (*Email rule : “Email + / + installer” to login.)
②
Please click "Search" button to scan for devices, please wait a few minutes.
③
See all inverters.
④
Set the grid code to all inverters on Data Collector.
(* Country : Select country where inverter stand. * Grid Code : Select specific grid codes for utility.)
⑤
Connect to Home page of APP.
IOS system:
Please search “MyDeltaSolar” in App store.
/ Android system:
Please search “MyDeltaSolar” in Google Play.
■ Where can search for MyDeltaSolar APP?
2.
Connect to Data Collector on Wi-Fi network
①
Turn on Data Collector.
②
Turn on Wi-Fi function of mobile device, and search Data Collector’ SSID (Delta-serial number-DC1).
③
Enter the default password “DELTASOL” to get Data Collector connected.
Choose SSID :
Delta-serial number-DC1
Delta-O1W14800005W0-DC1
Delta-O1W14800005W0-DC1
Settings
Settings
CHOOSE A NETWORK...
CHOOSE A NETWORK...
Enter default password :
DELTASOL
1.
First, register on APP (* Please open external Wi-Fi network)
①
Please fill in “installer”.
②
After click “SIGN IN” button (step1), pop-up “Use MyDeltaSolar Service terms and conditions”,
please check the box to enable "Register" button.
③
Installer register.
ON
1
Set to ON
ON
1
Set to ON
1
2
3
1
2
3
4
5
System will detect if there is master command on RS-485 port,
if it does then system will change to Wi-Fi/RS-485 mode.
* The system will be wifi mode while Data Collector reboot, after
detection of master command on RS-485 port, will change to
Wi-Fi/RS-485 mode automatically.
APP connect to Data Collector on Home page.
* Data collector can also works when
connected to power terminal of only
one inverter’s communication connector.
V1.16
V1.16
