Ethernet Communication Module DVPEN01-SL
DVP-PLC Operation Manual
22
correct time in the MPU. The
Enable Time Server
is unselected by default.
5.
Start Daylight Saving Time
Daylight Saving Time; also known as summer time is a conventional local time adopted by many countries
in the world on a seasonal basis. Most commonly DST is obtained by adjusting the official local time
forward, by one hour, for the spring, summer, and early autumn periods. Daylight Saving Time is not
implemented in Taiwan; therefore, you do not need to check this item.
6.
Time Server
IP address of the time server. You can acquire correct time from the time server to correct the time in the
MPU.
7.
Time Zone
A time zone is a region of the Earth that has adopted the same standard time, usually referred to as the
local time. Most adjacent time zones are exactly one hour apart, and by convention compute their local time
as an offset from Greenwich Mean Time (see also UTC). Standard time zones can be defined by
geometrically subdividing the Earth's spheroid into 24 lunes (wedge-shaped sections), bordered by
meridians each 15° of longitude apart. The local time in neighboring zones is then exactly one hour
different. However, political and geographical practicalities can result in irregularly shaped zones that follow
political boundaries or that change their time seasonally (as with daylight saving time), as well as being
subject to occasional redefinition as political conditions change. You should choice the Time zone that you
are.
8.
Protocol Select
DVPEN01-SL supports MODBUS TCP and the Mitsubishi MELSEC protocol in a UDP mode. The defatul
setting is MODBUS TCP.
5.3 Network Settings
The first step for all the network equipment to connect to the network is to have its own IP address (Internet Protocol).
The IP address is like a number for every network equipment to be identified in the network.
Setting the static IP address of the PC
1. Enter the
Control Panel
window.→ Enter the
Network Connections
window.→ Click on
Local Area
Connection
.
