Ethernet Communication Module DVPEN01-SL
DVP-PLC Operation Manual
25
5.4 Setting E-mails
E-mail is the abbreviation of electronic mail, which transmits mails through the network. DVPEN01-SL has E-mail
functions for the user to pre-save a segment of text messages, which can be a descriptive message or error message,
into the subject of the E-mail. When the E-mail is triggered, DVPEN01-SL will send the messages to the user by
E-mail.
DVPEN01-SL offers 4 sets of E-mail information, and you can self-define the register or bit information to be read.
When the trigger occurs, DVPEN01-SL will add the set register or bit present value read to the E-mail. Every piece of
E-mail information is able to contain the present values in the up to 100 consecutive registers.
Setting mails
1. SMTP Setting
The E-mail will first be sent to SMTP server, and SMTP server will send it to the designated address. For
example, assume there is an E-mail to be sent to test@delta.com.tw, and the SMTP server is
172.16.144.121. The E-mail will be sent to SMTP server first, and the server will further send it to the
recipient test@delta.com.tw.
The setting boxes are described below.
SMTP Server
: Setting the IP address of the SMTP server
Port
: Entering the port of the SMTP server (The default value is 25.)
Mail From
: Setting the mail address used to send E-mails (63 characters at most can be entered.)
User Name
: Account used to log in to the SMTP server
Password
: Password used to log in to the SMTP server
2. E-mail Subject of Event
You can enter text message in the column, and the message will be placed in the subject of the E-mail and
sent to the recipient. DVPEN01-SL is able to contain 1~4 E-mail subjects (max. 63 English characters are
allowed).
You can select additional information for the E-mail. Every E-mail is able to contain the present values in
100 consecutive registers.
3. Recipient E-mail Address
You can enter 4 E-mail addresses. One mail can be sent to 4 addresses (max. 63 English characters are
