Ethernet Communication Module DVPEN01-SL
DVP-PLC Operation Manual
33
2. New password
Maximum 4 characters are allowed. Leave the column blank to disable the password protection function.
3.
Confirm Password
Enter the new password again.
4. See section 6.4 for more details.
Note:
After the password is locked, all the pages cannot be set unless you unlock the password. However, if you set
DVPEN01-SL by RS-232, you can return the setting to default setting whether the password is locked or not.
For example, if you have locked DVPEN01-SL but forget the password, you have to return DVPEN01-SL to
factory default setting by RS-232, and all the settings will return to default ones.
5.12 Returning to Default Settings
If you need to clear all the settings after many modifications on the settings and return the settings to default ones,
select the
Factory Setting
checkbox.
Returning to default settings
Select the
Factory Setting
checkbox, and click on
Yes
.
Note:
If you set DVPEN01-SL by RS-232, you can return the setting to default setting whether the password is locked
or not. It takes approximately 10 seconds to return to default setting, so DO NOT switch off the power within the
10 seconds.
