Chapter 3 Featured Function
3-16
Description
Factory Default
Suffix Length
Specify the Suffix Length for comparison process. After specify the
Suffix Length, please enter the Suffix Char for process.
2
Suffix Char (Hex.)
Enter the Suffix Char for comparison process.
0xFF, 0xFF
Suffix Process
Specify the comparison process for the Suffix Length and Suffix Char.
Include Suffix Char:
The data will transmit all the Suffix Char
which user entered in Suffix Char (Hex.). If the Suffix Length is 1,
then only first Suffix Char will be included.
Only Suffix Char 1:
The data will transmit only Suffix Char 1
which user entered in Suffix Char (Hex.).
Not Include:
After the comparison process is complete, the data
will be transmitted without Suffix Char which the user entered in
Suffix Char (Hex.).
Include Suffix
Char
Aging Time
Specify the time for DVW device to force pack the received serial data
into the same data frame.
Notice:
Before you configure the settings of Aging Time, please
remember check the Enable item, otherwise the Aging Time
doesn’t be applied.
Disable/
1000 (ms)
3.3.1.4
TCP Client Mode
In TCP Client Mode, DVW device works as an active role. User can enter the destination IP
information of the host computer or device in Destination IP Table first. Then DVW device sends a
request message to the host for establish the connection first. After the connection is established,
the data can be transmitted between the host and DVW device.
Summary of Contents for DVW SERIES
