DVW Series Industrial IEEE 802.11 a/b/g/n Wireless AP/WDS/Client/Gateway User Manual
Description
Factory Default
Enable RSTP
Enable or disable the interface to be a node in the Spanning Tree
topology.
Check
Port Priority
Specify the port priority. Lower number means the interface has higher
priority; higher number means the interface has lower priority.
128
Port Cost
Specify the port cost. Lower cost means the interface is more suitable
to be a node in the Spanning Tree topology.
2000000
Edge Port
Specify whether the BPDU go through the port. Check the port as an
edge port means no BPDU go through the port.
None
3.5.6
SNMP Configuration
Simple Network Management Protocol (SNMP) is an application protocol used for exchanging
management information between network devices. SNMP is a member of the TCP/IP protocol
suite. SNMP V1, V2 and V3 are supported on the Delta DVW devices. When the SNMP protocol
version is V1, V2c. the authentication type use a community string. When the SNMP protocol
version is V3, then you need to specify the authentication type. If you have data encryption
requirement, you can specify the privacy type.
Description
Factory Default
Enable
Specify whether the SNMP agent is enabled.
None
3 - 5 1
Summary of Contents for DVW SERIES
