HELPLINE No. U K / N.IRELAND 0800 328 60 20 REP. IRELAND 00 800 44 67 58 88
WEB SUPPORT info@globaltronicssupport.com
Model Number: GT-SI-01-UK
12
1.
With the temperature control knob, set the top temperature range and wait until the
orange control lamp goes out.
2.
Hold the iron above the item of clothing to be ironed.
3.
Press the steam shot button for a brief moment
.
Hot steam is discharged from the outlets in the soleplate.
4.
Release the steam shot button.
Note
- The setting of the steam controller is irrelevant for the steam shot function.
- Do not press the steam shot button more frequently than 3x in a row.
Otherwise, the soleplate cools off too quickly and water droplets are
discharged.
Spraying water
As soon as the tank is sufficiently filled with water, the spray device is available.
It is independent from the set temperature and can be used for dry ironing and steam
ironing.
1.
Point the spray nozzle at the place to be moistened.
2.
Press the spray button
.
Note
- It can occur that there is still air in the spray nozzle. If necessary, press the spray
button several times.
- You should not spray silk prior to ironing due to possible water stains. Instead,
wrap the textile in a slightly dampened towel.
Smoothing textiles that are hanging up
HAZARD
The escaping steam is very hot. Do not touch it. Never point the steam shot at
people or animals.
With the vertical steam shot, you can smooth numerous hanging textiles or textiles have
been hung up for this purpose.
The steam shot function is only available in the top temperature
range. This is marked accordingly on the temperature control
knob.
The steam shot function can be used for steam ironing and dry
ironing, in order to e.g. smooth stubborn creases or obtain firm
ironing creases.
E45331 Steam Iron Aldi UK Delta IM.book Seite 12 Freitag, 16. November 2012 2:40 14
