Wi-Fi communication will be disconnected from your Data Collector account at this time.
Please go back to the Wi-Fi settings page and reconnect to the Data Collector.
4. Check [RetroFit] again and click [On]. Click [Search] to detect Inverter.
5. Please check your inverter serial number. (the serial number information is marked on the rating label of the machine)
6. Set the inverter ID.
7. After confirming, please click the [SET] button. (wait for 2 to 10 minutes to set, depending on the number of settings)
8. When the message [Connected Successfully] appears, click the [NEXT] button to proceed to the next step.
4
4
4
5
6
7
8
31
