When wiring the power meter, make sure to turn OFF the breakers connected to the power meter. Although small,
there is a risk of electric shock.
Do not touch the Product with wet hands.
The Product may cause injury due to electric shock or equipment malfunction may occur in the unlikely event
such an occurrence takes place.
When installing the DC1 on a wall made of materials that are not wood,
be sure to acquire plastic anchors available on the market to secure the Wall
Surface Mounting Plate on the wall surface. There is danger of injury from
the Product falling in some rare cases.
When installing the DC1, make sure to turn OFF all solar generator breakers and direct current switches for the
inverter.
Although small, there is a risk of electric shock.
Do not disassemble or modify the Product.
The Product may cause injury or fire due to electric shock in the unlikely event such an occurrence takes place.
Caution
Do not allow any fire producing objects to be near the Product, or apply any spray, including combustible gases,
to the Product. The Product may ignite or explode in the unlikely event such an occurrence takes place.
Do not install the Product in a place that is subject to significant effects of vibration
and impact. There is danger of injury from the Product falling in some rare cases.
Do not use organic solvents (paint thinners, benzene and the like), strong alkaline
substances or strong acidic substances to clean the case of the product. There is
danger of discoloring the case or the equipment malfunctioning in some rare cases.
Warning
Securely tighten the screws using a torque of 0.98 N.m.
Although small, there is a risk of burns due to defective connections.
Do not tighten the wiring using electric tools (drills), whose main purpose is to open
holes, such as impact drivers, etc.
Do not install the Product in the following types of locations:
There is danger of burnout in some rare cases.
・
Locations that are exposed to rain water, such as outdoors or under eaves and the like.
・
Locations that are exposed to steam or where the moisture level is 30 to 85% RH,
such as lavatories, changing rooms, work sites, kitchens and the like.
5
