7
EXTENSION CORDS
Use proper extension cords. Make sure your extension cord is in good condition and is a 3-
wire extension cord which has a 3-prong grounding type plug and matching receptacle which will accept the
machine’s plug. When using an extension cord, be sure to use one heavy enough to carry the current of the
machine. An undersized cord will cause a drop in line voltage, resulting in loss of power and overheating.
Fig. C-1, shows the correct gauge to use depending on the cord length. If in doubt, use the next heavier gauge.
The smaller the gauge number, the heavier the cord.
Fig.C-1
MINIMUM GAUGE EXTENSION CORD
RECOMMENDED SIZES FOR USE WITH STATIONARY ELECTRIC MACHINES
Ampere
Rating
Volts
Total
Length of
Cord in
Feet
Gauge of Extension
Cord
0-6
120
up to 25
18 AWG
0-6
120
25-50
16 AWG
0-6
120
50-100
16 AWG
0-6
120
100-150
14 AWG
6-10
120
up to 25
18 AWG
6-10
120
25-50
16 AWG
6-10
120
50-100
14 AWG
6-10
120
100-150
12 AWG
10-12
120
up to 25
16 AWG
10-12
120
25-50
16 AWG
10-12
120
50-100
14 AWG
10-12
120
100-150
12 AWG
12-16
120
up to 25
14 AWG
12-16
120
25-50
12 AWG
12-16
120
gREATER THAN 50 FEET NOT RECOMMENDED
FOREWORD
Delta Model SA180 is the ultimate machine for sanding wood and grinding metal. The 3000 SFPM belt speed is ideal for
metal grinding, deburring and sharpening, as well as sanding and buffing jobs. The 8" diameter disc operates at 1725
rpm for finishing hard and soft woods, plastics, compositions and more.
NOTICE:
The photo on the manual cover illustrates the current production model. All other illustrations contained in the
manual are representative only and may not depict the actual labeling or accessories included. These are intended to
illustrate technique only.
FUNCTIONAL DESCRIPTION
Summary of Contents for SA180
Page 21: ...21 FRANÇAIS ...
Page 41: ...41 ESPAÑOL ...
