background image

5- ENG

D27930

HOW TO PREVENT IT

WHAT CAN HAPPEN

WARNING: Risk to Breathing

WARNING: Risk of Electrical Shock

HOW TO PREVENT IT

WHAT CAN HAPPEN

HAZARD

HAZARD

Your air compressor is powered by
electricity. 
Like any other electrically
powered device, If it is not used properly
it may cause electric shock.

Repairs attempted by unqualified
personnel can result in serious injury or
death by electrocution.

Electrical Grounding: Failure to provide
adequate grounding to this product
could result in serious injury or death
from electrocution. 
See grounding instructions.

Never operate the compressor outdoors
when it is raining or in wet conditions.

Never operate compressor with
protective covers removed 
or damaged.

Any electrical wiring or repairs required
on this product should be performed by
authorized service center personnel 
in
accordance with national and local
electrical codes.

Make certain that the electrical circuit
to which the compressor is connected
provides proper electrical grounding,
correct voltage and adequate fuse
protection.

The compressed air directly from your
compressor is not safe for breathing.
The air stream may contain carbon
monoxide, toxic vapors, or solid
particles 
from the tank. Breathing these
contaminants can cause serious injury
or death
.

Sprayed materials such as paint, paint
solvents, paint remover, insecticides,
weed killers, may contain harmful vapors
and poisons.

Air obtained directly from the compressor
should never be used to supply air for
human consumption. 
In order to use air
produced by this compressor for
breathing, suitable filters and in-line
safety equipment must be properly
installed. 
In-line filters and safety
equipment 
used in conjunction with the
compressor must be capable of treating
air to all applicable local and federal
codes prior to human consumption.

Work in an area with good cross
ventilation. 
Read and follow the safety
instructions 
provided on the label or
safety data sheets for the materials you
are spraying. Use a NIOSH/ MSHA
approved respirator 
designed for use
with your specific application.

Summary of Contents for ShopMaster CP200



















Reviews: