2
Amplon N Series
Usage Warnings
z
z
This is a class-A product. In a domestic environment, this product may cause ra-
dio interference, in which case, the user is required to take adequate measures.
z
z
The UPS can be used to power computers and associated peripheral devices,
such as monitors, modems, cartridge tape drives, external hard drives, etc.
z
z
It is strictly forbidden to connect the UPS with:
1. any regenerative-type loads.
2. any asymmetrical loads (ex. half-wave rectifier).
z
z
To ensure reliable operation of the UPS and to protect the UPS from overheat-
ing, the slits and openings in the UPS must not be blocked or covered.
z
z
Before usage, you must allow the UPS to adjust to room temperature for at least
one hour to avoid moisture condensing inside the UPS.
z
z
Do not pour and splash any liquid on the UPS. Do not insert any object into
the UPS’s slits and openings. Do not put beverage containers on or around the
UPS.
z
z
When an emergency occurs, press the
OFF
button (
) and release it after
you hear one beep to turn off the UPS. Cut off the input power to completely
shut down the UPS.
z
z
Do not use any cleaning liquid or cleaning spray to clean the UPS. Before clean-
ing, please make sure that the UPS has been completely shut down, the UPS’s
input power cord has been unplugged, and the built-in batteries have been dis-
connected.
z
z
All maintenance services must be performed by qualified service personnel.
Forbid opening or removing the cover of the UPS to avoid high voltage electric
shock.
z
z
You must contact qualified service personnel if either of the following events oc
-
cur:
1. Liquid is poured or splashed on the UPS.
2. The UPS does not run normally after this
User Manual
is carefully
observed.
NOTE :
If you use the UPS in an area that generates or incurs dust, you should
install a dust filter in the UPS to ensure normal product life and function.
Summary of Contents for UPS102N2000N0B0
Page 39: ......
Page 40: ...5013231700...
