Installation guide
Page 44
If you are installing your card in a new PC, PCIe slots may present some mechanical resistance as
the card slides into the slot. Press the card strongly but carefully into the slot.
My computer will not boot since I installed one DELTACAST device
The first issue could be that your card is not correctly positioned into its slot. In this case, turn off
all power supplies and ensure that the card properly fits into the slot.
Another possible issue is that a cable (IDE cable) or PC component (RAM module) has been
accidentally moved and not correctly repositioned during the installation.
8.2.2
Windows
After having placed a DELTACAST device in my PC and re-started it, Windows did not prompted
me to install a driver
The DELTACAST device installation is done using a script provided in the redistributable package.
Please refer to the installation chapter.
8.3
FLEX Solution
8.3.1
DELTA-gwy
8.3.1.1
General
I cannot insert my DELTACAST card in a PCIe slot
If you are installing your card in a new PC, PCIe slots may present some mechanical resistance as
the card slides into the slot. Press the card strongly but carefully into the slot.
8.3.2
FLEX modules
8.3.2.1
General
The FLEX module doesn’t appear in my operating system
Your FLEX module could have been plugged while the operating system was running. In that case,
please restart your computer.
Your DELTA-gwy might not be powered with an external « PCI Express 150W-ATX
»
power cable.
Please make sure that it is the case.
Your FLEX module might not be connected properly to your DELTA-gwy. If it is connected
properly, please make sure that you are using the specific cables provided with the solution.
Summary of Contents for A-FLEX-1M
Page 1: ...Installation guide Page 1 Installation Guide for End Users Hardware and Software...
Page 53: ...Installation guide Page 47 9 3 DoC Notices...
Page 54: ...Installation guide Page 48...
Page 55: ...92 6 rue Gilles Magn e B 4430 ANS BELGIUM 32 4 239 78 81 contact deltacast tv www deltacast tv...