93
GB
Use the graphical symbol below the chain
sprocket cover (15) as a guide to the
alignment of the saw chain (5) when the
blade is rotated. The illustrated direction of
travel on the blade is no longer true.
Maintenance Interval Table
Machine part
Action
Before every
use
After 10 hours
of operation
Komponenten der
Kettenbremse
Check, replace if required
Kettenritzel (22)
Check, replace if required
Saw chain (5)
Check oil, regrind or replace
if required
Guide bar (4)
Check, clean and oil
Guide bar (4)
Turn around
Automatic oil
system
Check, clean oil aperture if
necessary
Storage
• Clean the equipment before putting it
away.
• Empty the oil tank before longer peri-
ods of non-use. Dispose of waste oil
environmentally correctly (see „Waste
disposal and environmental protection“).
• Put on saw bar protection sheath.
• Store the appliance in a dry place well
out of reach of children
Waste disposal and
environmental protection
Remove the battery from the device and
take the device, battery, accessories and
packaging for environmentally friendly
recycling.
Maintenance intervals
Regularly carry out the maintenance oper-
ations listed in the following table. The life
of the saw is extended by regular main-
tenance of your chainsaw. Furthermore,
you get optimum cutting performance and
avoid accidents.
Machines do not belong with do-
mestic waste.
• Before disposal, remove batteries from
the device first.
• Hand the device and the charger in to
a recycling point.
• Do not dispose of used oil in the sew-
age system or drains. Dispose of
used oil in an environmentally correct
manner - bring it to a waste disposal
center.
• Defective units returned to us will be
disposed of for free.
