61
GB
Carry out the following maintenance and
cleaning work regularly. This will guaran-
tee a long and reliable service life.
Do not spray the equipment with
water or place it in water. Do not
use detergents or solvents. These
could cause irreparable dam-
age to the equipment. Chemical
substances may attack the plastic
parts of the equipment.
• Before each use, check the hedge
trimmer for obvious defects such as
loose, worn or damaged parts. Check
the secure seating of the bolts in the
cutter bar.
• Do not use the unit if the blades are
blunt or worn. This will overstress the
motor and gearbox of the machine.
• Check coverings and safety devices
for damage and correct seating. Re-
place these where necessary.
• Keep the ventilation slots ( 5) and
motor housing of the device clean.
Use a damp cloth or a brush to do this.
Do not use any cleaning agents or sol-
vents. These could cause irreparable
damage to the equipment. Chemical
substances can attack the plastic parts
of the equipment.
• Always keep the blade clean.
After using the equipment, it is
imperative to:
- Clean the blade (with
an oily cloth);
- Oil the blade shaft
with an oil can or
spray.
Storage
• Keep the hedge trimmer dry and out of
reach of children in the blade guard
( 12) supplied.
Waste Disposal and
Environmental Protection
Be environmentally friendly. Return the
tool, accessories and packaging to a recy-
cling centre when you have finished with
them.
Electrical machines do not belong
in domestic waste.
Take the equipment to a waste disposal
site. The plastic and metal parts that
are used can be separated out into pure
grade, which allows recycling. Ask our
Service Centre for details
We will dispose of the defective equip-
ment you send in, free of charge.
Spare Parts
Spare parts and accessories can be
obtained at
www.grizzly-service.eu
If you have any other questions, contact the
”Service-Center” (see “Service-Center”).
Guarantee
This unit has a guarantee period of 24
months. This equipment is not suitable
for commercial use.Commercial use will
invalidate the guarantee.
The guarantee does not include dam-
ages that are attributable to natural wear,
overloading or inappropriate use. Certain
component parts are subject to normal
wear and are excluded from the guaran-
tee. In particular, cutter bars, eccentric
drives and carbon brushes are included
here, providing the complaints cannot be
attributed to material defects.
Furthermore, a condition of the guarantee
Summary of Contents for DG-EHT 6860 3D
