HD2011NMT
- 18 -
V1.2
7
STORAGE OF INSTRUMENTS
Storage conditions of the instruments:
•
Temperature: -25...+65 °C.
•
Humidity: less than 90 %RH no condensation.
•
For storage, avoid places where:
•
There is a high level of humidity;
•
Instruments are exposed to direct sun radiation;
•
Instruments are exposed to a high temperature source;
•
There are strong vibrations;
•
There is vapor, salt and/or corrosive gases.
8
SAFETY INSTRUCTIONS
General instructions for safety
These instruments have been manufactured and tested in compliance with the safety
standards EN61010-1:2010 for electronic instruments of measure and left the factory
in perfect safety technical conditions.
The regular functioning and operational safety of these instruments can be ensured
only if all normal safety measures, as well as the specific measures described in this
manual, are followed.
The regular functioning and operational safety of the instruments can only be guaran-
teed under the climatic conditions specified in the manual.
Do not use the instruments in places where there are:
•
Rapid ambient temperature variations that may cause condensation.
•
Corrosive or flammable gases.
•
Direct vibrations or bumps to the instrument.
•
High-intensity electromagnetic fields, static electricity.
If instruments are transported from a cold environment to a warm one, or vice versa,
the formation of condensation may cause disturbances to their functioning. In this
case, wait until the temperature of the instrument reaches room temperature before
putting into operation.
Obligations of the User
The user of the instruments must ensure compliance with the following standards and
guidelines for the treatment of hazardous materials:
EEC directives on workplace safety
National low regulations on workplace safety
Accident prevention regulations
Summary of Contents for HD2011NMT
Page 4: ...HD2011NMT 4 V1 2 2 DESCRIPTION ...
Page 22: ...HD2011NMT 22 V1 2 NOTES ...
Page 23: ......
