HD2011NMT
- 5 -
V1.2
1.
Antenna.
2.
Terminal block.
3.
ON/OFF switch.
4.
Handle with key lock.
5.
Documents holder.
6.
Battery.
7.
Feet.
8.
Sound Level Meter.
9.
Handle for transport.
10.
Solar radiations shield.
11.
LEDs:
•
EXTERNAL POWER
LED: indicates the presence of the external power supply
(solar panel or 24 V
DC
source).
•
NETWORK CONNECTION
LED: lights up at the end of the functional check
and the initial automatic configuration with the server after switching on the
station. If it remains off after the initial phase, it means there are network
problems or the station has not been recognized by the server.
•
CONTROLLER
LED: lights up at the end of the functional check after switch-
ing on the station, to indicate that the electronics controlling the station is op-
erational.
•
CHARGE
LED: indicates that the battery is being charged.
•
BATTERY LEVEL
LEDs: indicate the battery charge level.
o
All LEDs off: low battery
o
1 LED on: charge is less than 25%
o
2 LEDs on: charge is between 25% and 50%
o
3 LEDs on: charge is between 50% and 75%
o
4 LEDs on: charge is more than 75%
•
POWER
LED: indicates the presence of the internal power supply (12 V
DC
of
the battery).
•
ACTIVITY
LED: blinks during the communication with the server; it is off when
the station is not communicating.
•
ON LINE
LED: indicates the presence of the connection with the server via
the internal modem. If it is off, it means there are network problems.
At the bottom of the housing there are the connections for the antenna, the micro-
phone unit, the external power supply (only for models with power supply from solar
panel or 24 V
DC
source) any other optional external devices (meteorological sensors,
alarm indicators, …).
Summary of Contents for HD2011NMT
Page 4: ...HD2011NMT 4 V1 2 2 DESCRIPTION ...
Page 22: ...HD2011NMT 22 V1 2 NOTES ...
Page 23: ......
