HD32.1
- 23 -
V2.1
The first line of the display indicates the acronym
“CO2”,
indicating that the measurement of
carbon dioxide concentration
detected by the
CO
2
probe
with SICRAM module is visualized on
the display.
The measurement unit in
ppm
(parts per million) can’t vary.
When you start the instrument up, it realizes a warm-up (the heating) of at least 30 seconds of the
probe before visualizing CO
2
measurement. The writing “warm-up” stays on for other 30 seconds
together with the measurement to indicate that the indicated values could not already be within the
declared accuracy limits. When the writing “warm-up” switches off, the instrument is working.
The probe is calibrated by the company and usually doesn’t request any other intervention by the
user.
However, there is the possibility to calibrate again: see the chapter that deals with the Probe "
Probe
HD320B2 for the measurement of CO
2
carbon dioxide concentration
".
Pushing the
function key F3
when there is the writing
next
on the last line you go on visualizing
the measurements detected by
CO
2
probe complete with SICRAM module. The visualization is the
following one:
The first line of the display indicates the symbol
“CO”,
indicating that the measurement of
carbon
monoxide concentration
detected by the
CO probe
with SICRAM module is visualized on the
display.
The measurement unit in
ppm
(parts per million) can’t vary.
When you start the instrument up, it realizes a warm-up (the heating) of at least 30 seconds of the
probe before visualizing CO measurement. The writing “warm-up” stays on for other 30 seconds
together with the measurement to indicate that the indicated values could not already be within the
declared accuracy limits. When the writing “warm-up” switches off, the instrument is working.
The probe is calibrated by the company and usually doesn’t request any other intervention by the
user.
However, there is the possibility to calibrate again: see the chapter that deals with the Probe "
Probe
HD320A2 for the measurement of CO
carbon monoxide concentration
".
Pushing the
function key F3
at the end of the cycle, when on the last line of the display there is the
indication
next
, you go back to the visualization of the measurements detected by the Pt100 probe.
If one of the probe described is not connected to the instrument when switching on, the
corresponding visualization does not appear.
Summary of Contents for HD32.1
