HD32.1
- 30 -
V2.1
NOTE:
Once selected, for example
max
, all displayed quantities represent the maximum value.
The average is calculated on the first five minutes of samples, and then on the current
average.
The
F3
key allows choosing to clear (
Clr
) the maximum, minimum and average data of the
captured measurements:
1.
In order to clear the data, select
Clr
with
F3
;
2.
Another drop-down menu will open;
3.
Use the arrow keys
▲▼
to select
yes
;
4.
Press
ENTER
to confirm.
5.
Press
ESC
or select
no
, to exit without clearing the data.
4.1.7 Instrument Setup
In order to set the instrument, you have to open the main menu by pressing
SETUP
. See the next
chapter for further details.
4.1.8 Start of a new logging session
Press
MEM
to start a
Logging
session: This key starts and stops the logging of a data block to be
saved in the instrument's internal memory. The data logging frequency is set in the
"Log interval"
menu parameter. The data logged between a start and subsequent stop represent a measurement
block.
When the logging function is on, the
LOG
indication is displayed, the battery symbol blinks and a
beep is issued each time a logging occurs.
To end the logging, press
MEM
again.
The instrument can turn off during logging between one capture and the next: The function is
controlled by the
Auto_shut_off_Mode
parameter. When the logging interval is less than one
minute, the logging instrument remains on; with an interval of at least one minute, it turns off
between one capture and the next.
Summary of Contents for HD32.1
