HD32.1
- 39 -
V2.1
NOTE: By default the acquisition end time is 10 minutes after the logging session start time.
8.
Once both values have been set, a summary will be displayed: Start and end time of the LOG
session.
9.
Press
ENTER
to confirm or
ESC
to exit without enabling the automatic start: In both cases, you
will return to the
LOGGING
menu.
10.
Press
SETUP
to exit immediately from the main menu.
When the instrument starts automatically a LOG session, a beep is issued on each capture and the
blinking
LOG
message is shown at the top of the display.
Press
MEM
to stop the session before the set time.
To cancel the automatic start setting, use the
Cancel auto start
function as illustrated in the
following paragraph.
NOTE:
The automatic logging session is started even when the instrument is off
. If it is off
when the automatic logging session is started, the instrument is turned on few seconds earlier and
remains on at the end of logging. If it is powered by the battery, it is turned off when idle for some
minutes at the end of the logging session.
See paragraph 4.2.2 to set the automatic shut off.
5.2.4 Cancel auto start
Once the LOG session start and end times are set, you can prevent the session automatic start by
using
Cancel auto start
.
Once you have accessed the
LOGGING
submenu:
1.
Use the arrow keys
▲
▼
to select
Cancel auto start
2.
The LOG session start and end times will be displayed:
Summary of Contents for HD32.1
