HD32.1
- 42 -
V2.1
1. press ENTER to erase all files;
2. press ESC to undo and back to the previous menu;
3. press SET to exit the main menu directly.
2) Log time interval
It refers to logging time: when the set time interval expires, logging stops. Press the MEM key to
stop logging before the set time interval expires.
To disable this function, set time at 0. In this case, if you press the MEM key or the memory is full,
logging will stop.
Use the arrow keys to change the set time, the allowed maximum value is 1 hour.
Press
ENTER
to confirm.
Press
ESC
to exit this submenu without saving changes.
Press
SETUP
to exit the main menu directly.
5.3
S
ERIAL
M
ENU
(S
ERIAL
C
OMMUNICATION
)
The
Serial
submenu allows setting the data transfer speed via serial port (
Baud rate
) and the record
printing interval (
Print Interval
).
The LOG sessions can be downloaded on a PC, through serial
RS232
or
USB
connection.
In case of serial connection, the transfer speed can be set by the user (see next par.) but it can not be
higher than 38400 bps.
In case of USB connection, the transfer speed is fixed at 460800 bps.
After downloading the data on the PC, using the dedicated software, they will be processed by this
software for graphic display and the calculation of the comfort/stress indexes.
The instrument can be connected directly to an 80 column serial printer.
To access the
Serial
submenu, proceed as follows:
1.
Press
SETUP
;
2.
Use the arrow keys
▲▼
to select
Serial
;
3.
Press
ENTER
;
Summary of Contents for HD32.1
